topic ethernet eth0 problem in Processor Expert Software https://community.nxp.com/t5/Processor-Expert-Software/ethernet-eth0-problem/m-p/811218#M4188 <HTML><HEAD></HEAD><BODY><P>Hello ,</P><P>we are using nitrogen6x_max board where the Ethernet eth0 is not working, it is failing at boot time.</P><P>and getting error:</P><P><STRONG>ifconfig :SIOCIFFLAGS: no such device</STRONG></P><P>even if we try to make ethernet eth0 up with ifconfig ,getting the same error:</P><P><STRONG>ifconfig :SIOCIFFLAGS: no such device</STRONG></P><P></P><P>Here is the <STRONG>dmesg | grep eth</STRONG></P><P style="margin: 2.0pt 0in 2.0pt 0in;"><SPAN style="font-size: 10.0pt; color: black;">[&nbsp;&nbsp;&nbsp; 1.825482] 2188000.ethernet supply phy not found, using dummy regulator</SPAN></P><P style="margin: 2.0pt 0in 2.0pt 0in;"><SPAN style="font-size: 10.0pt; color: black;">[&nbsp;&nbsp;&nbsp; 1.830803] fec 2188000.ethernet eth0: registered PHC device 0</SPAN></P><P style="margin: 2.0pt 0in 2.0pt 0in;"></P><P style="margin: 2.0pt 0in 2.0pt 0in;"><SPAN style="font-size: 10.0pt; color: black;">can any one tell what might be gone wrong ? whether there is problm with<STRONG> driver or PHY chipset device is not able to find by fec driver.</STRONG> </SPAN></P></BODY></HTML> Fri, 13 Jul 2018 09:50:25 GMT mallikarjuntera 2018-07-13T09:50:25Z ethernet eth0 problem https://community.nxp.com/t5/Processor-Expert-Software/ethernet-eth0-problem/m-p/811218#M4188 <HTML><HEAD></HEAD><BODY><P>Hello ,</P><P>we are using nitrogen6x_max board where the Ethernet eth0 is not working, it is failing at boot time.</P><P>and getting error:</P><P><STRONG>ifconfig :SIOCIFFLAGS: no such device</STRONG></P><P>even if we try to make ethernet eth0 up with ifconfig ,getting the same error:</P><P><STRONG>ifconfig :SIOCIFFLAGS: no such device</STRONG></P><P></P><P>Here is the <STRONG>dmesg | grep eth</STRONG></P><P style="margin: 2.0pt 0in 2.0pt 0in;"><SPAN style="font-size: 10.0pt; color: black;">[&nbsp;&nbsp;&nbsp; 1.825482] 2188000.ethernet supply phy not found, using dummy regulator</SPAN></P><P style="margin: 2.0pt 0in 2.0pt 0in;"><SPAN style="font-size: 10.0pt; color: black;">[&nbsp;&nbsp;&nbsp; 1.830803] fec 2188000.ethernet eth0: registered PHC device 0</SPAN></P><P style="margin: 2.0pt 0in 2.0pt 0in;"></P><P style="margin: 2.0pt 0in 2.0pt 0in;"><SPAN style="font-size: 10.0pt; color: black;">can any one tell what might be gone wrong ? whether there is problm with<STRONG> driver or PHY chipset device is not able to find by fec driver.</STRONG> </SPAN></P></BODY></HTML> Fri, 13 Jul 2018 09:50:25 GMT https://community.nxp.com/t5/Processor-Expert-Software/ethernet-eth0-problem/m-p/811218#M4188 mallikarjuntera 2018-07-13T09:50:25Z