Processor Expert SoftwareのトピックRe: How to use processor expert for MC9S12DG128CPVE microcontroller

How to use processor expert for MC9S12DG128CPVE microcontroller

arunrajk — Tue, 06 Mar 2018 09:15:31 GMT

Hi,

I am using freescale MC9S12DG128CPVE microcontroller for my project. But the processor expert not cpu architecture for that particular microcontroller. How i use the processor expert for above mentioned microcontroller.

Re: How to use processor expert for MC9S12DG128CPVE microcontroller

Alice_Yang — Thu, 08 Mar 2018 01:36:23 GMT

Hello Arunraj K,

You can use the cpu component as below :

please have a look at the part number meaning :

Hope it helps

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: How to use processor expert for MC9S12DG128CPVE microcontroller

arunrajk — Thu, 08 Mar 2018 04:30:05 GMT

Hi yang,

Thanks for the reply. I think my way of questioning is wrong. My problem is that mentioned CPU is not found in the processor expert menu. what can i do for getting that particular cpu in my processor expert menu?

My Processor expert menu screen short is given in below,

When i creating the project the error was like in below image,

Re: How to use processor expert for MC9S12DG128CPVE microcontroller

Alice_Yang — Fri, 09 Mar 2018 09:46:29 GMT

Hello Arunraj,

Which version of CW do you used ?

5.1 ? Please check have you install the update .

5.2? Please check this thread :

https://community.nxp.com/message/908307

Alice

Re: How to use processor expert for MC9S12DG128CPVE microcontroller

arunrajk — Fri, 09 Mar 2018 12:34:46 GMT

Hi Alice,

I installed CW version 5.2. same what is mentioned in the given link. After that i will get the controller package in CW but not in the Processor expert. That is the problem what i am facing now. please help me to solve the issue.

Re: How to use processor expert for MC9S12DG128CPVE microcontroller

Alice_Yang — Wed, 14 Mar 2018 09:42:18 GMT

Hello Arunraj K,

You can try to install the Processor Expert update , while I haven't test it .

If it can't work, I think you can choose CW5.1.

About download the PE update , please go to the CW5.2 download site, then choose "Previous " button,

select 5.1,

https://nxp.flexnetoperations.com/control/frse/download?agree=Accept&element=5901341

then :

Hope it helps

Have a great day,
TIC

Re: How to use processor expert for MC9S12DG128CPVE microcontroller

arunrajk — Thu, 15 Mar 2018 05:15:52 GMT

Hi Alice,

Now the issue solved. Thanks Alice for the support.

Have a good day,

Arunraj k

Re: How to use processor expert for MC9S12DG128CPVE microcontroller

Alice_Yang — Wed, 11 Apr 2018 03:42:55 GMT

Hi Arunraj K,

It is my pleasure.

Alice