topic Re: [MK10 and Processor Expert] OSC0_CR registre reset boad in Processor Expert Software

[MK10 and Processor Expert] OSC0_CR registre reset boad

loicr — Wed, 30 Aug 2017 16:31:58 GMT

Hi,

I work on thé MK10 board and I havé problem

when i configure OSCO_CR register to enable external oscillator, the board reset.

(In the cpu.c file => init hardware Function)

can you help me please ?

before Try enter in low power mode, the board worked perfectly

Best regards

Loïc

Re: [MK10 and Processor Expert] OSC0_CR registre reset boad

loicr — Mon, 04 Sep 2017 08:35:42 GMT

Up ! please

best regards

Re: [MK10 and Processor Expert] OSC0_CR registre reset boad

ZhangJennie — Mon, 04 Sep 2017 11:02:52 GMT

This can be either HW or SW problem.

How did you configure OSCO_CR ? by pe generated code or writing code by hand?

How to reproduce your problem?

Best Regards

Jennie Zhang

Re: [MK10 and Processor Expert] OSC0_CR registre reset boad

loicr — Mon, 04 Sep 2017 11:06:05 GMT

Hi,

I use the PE generated code

I can't reproduce this problem on the other board

best regard

Re: [MK10 and Processor Expert] OSC0_CR registre reset boad

ZhangJennie — Wed, 06 Sep 2017 02:58:58 GMT

Ｉdidn't find problem when I am working with this feature,

Please check if the on board external clock design is correct. If necessary, please upload your demo project here for check.

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: [MK10 and Processor Expert] OSC0_CR registre reset boad

loicr — Fri, 27 Oct 2017 13:50:18 GMT

Hi,

finaly I don't find problem. I changed board

Thank you very much

Loïc