topic Multiple trigger ADC Channels with PE in Processor Expert Software https://community.nxp.com/t5/Processor-Expert-Software/Multiple-trigger-ADC-Channels-with-PE/m-p/628588#M3968 <HTML><HEAD></HEAD><BODY><P>Hello!!!</P><P>I want to check 4 adc channels if they arrive a X value and that these produce an interruption. I was reading that EnableInChanTrigger and EnableAutoCompare can help me; However, when I want to configure my second channel in this trigger mode, it gives me ERR_BUSY. I don't know what I'm doing wrong.</P><P></P><P>I'm using Processor Expert with MK60DN512VLQ10 microcontroller.</P><P>BR</P><P></P><P>Norberto Jiménez</P></BODY></HTML> Thu, 03 Nov 2016 19:26:36 GMT norbertoj 2016-11-03T19:26:36Z Multiple trigger ADC Channels with PE https://community.nxp.com/t5/Processor-Expert-Software/Multiple-trigger-ADC-Channels-with-PE/m-p/628588#M3968 <HTML><HEAD></HEAD><BODY><P>Hello!!!</P><P>I want to check 4 adc channels if they arrive a X value and that these produce an interruption. I was reading that EnableInChanTrigger and EnableAutoCompare can help me; However, when I want to configure my second channel in this trigger mode, it gives me ERR_BUSY. I don't know what I'm doing wrong.</P><P></P><P>I'm using Processor Expert with MK60DN512VLQ10 microcontroller.</P><P>BR</P><P></P><P>Norberto Jiménez</P></BODY></HTML> Thu, 03 Nov 2016 19:26:36 GMT https://community.nxp.com/t5/Processor-Expert-Software/Multiple-trigger-ADC-Channels-with-PE/m-p/628588#M3968 norbertoj 2016-11-03T19:26:36Z Re: Multiple trigger ADC Channels with PE https://community.nxp.com/t5/Processor-Expert-Software/Multiple-trigger-ADC-Channels-with-PE/m-p/628589#M3969 <HTML><HEAD></HEAD><BODY><P>Hello Norberto,</P><P>I am sorry but the ADC device on MK60DN512VLQ10 support selection of one channel only, i.e. you cannot enable automatic compare for two and more channels concurrently. You must select (switch) channels subsequently.</P><P>If you need to configure 4 channels, set automatic compare value and wait for interrupt you must emulate this functionality by own application code. The ADC device does not support this functionality.</P><P></P><P>Best Regards,</P><P>Marek Neuzil</P></BODY></HTML> Tue, 29 Nov 2016 07:35:55 GMT https://community.nxp.com/t5/Processor-Expert-Software/Multiple-trigger-ADC-Channels-with-PE/m-p/628589#M3969 marek_neuzil 2016-11-29T07:35:55Z