topic Re: MKE06Z128VLH4 ,use Processor Expert create program CAN1 component ;after compile find error in Processor Expert Software

MKE06Z128VLH4 ,use Processor Expert create program CAN1 component ;after compile find error

俊峰王 — Sat, 11 Apr 2015 14:22:37 GMT

in the struct CAN1_TDeviceData ;can't find "SavedBusOffISRSettings"......

typedef CAN1_TDeviceData *CAN1_TDeviceDataPtr;

Re: MKE06Z128VLH4 ,use Processor Expert create program CAN1 component ;after compile find error

Alice_Yang — Sun, 12 Apr 2015 07:29:35 GMT

Hello 王俊峰，

Please have a try to only add the CAN component , check it whether can work well.

If it can work well , please tell me how to configure the CAC component , then it can show the error, i will test it on my side.

Best Regards,

Alice

-----------------------------------------------------------------------------------

If this post help your question, please click the helpful Answer button.

Re: MKE06Z128VLH4 ,use Processor Expert create program CAN1 component ;after compile find error

俊峰王 — Tue, 14 Apr 2015 09:47:14 GMT

Hello Alice_Yang:

I have add the CAN_LDD component only,create source and compile ,i work well;

then i add MAXLite component, create source and compile ,same error

Re: MKE06Z128VLH4 ,use Processor Expert create program CAN1 component ;after compile find error

marek_neuzil — Tue, 14 Apr 2015 10:31:38 GMT

Hello,

This is known issue of CAN_LDD component driver. We have fixed the issue and there is a hot fix for KDS 2.0.0 and CW MCU 10.6.x. See attached hot fix packages.

Best Regards,

Marek Neuzil