Processor Expert SoftwareのトピックRe: integrating MQX with PE

integrating MQX with PE

manu_00 — Mon, 29 Oct 2012 15:24:54 GMT

hey,

I have the following problem: I want to add MQX with Processor Expert. So i create an pe project, goto Operating System and rightclick on MXQ --> add to project. Now I want to build the project to see if everything has worked fine. But I get the following error message

the file 'mqx.h' cannot be opened PE_LDD.c /PE/Generated_Code line 22 C/C++ Problem

I have no idea what to do because I am new to PE and I havent had any comparrable issues before.

Do you have any suggestions?

Thanks!

Re: integrating MQX with PE

BlackNight — Mon, 29 Oct 2012 15:33:41 GMT

Hello,

have you generated code? Right click on the ProcessorExpert.pe and choose 'Generate Code'.

Hope this helps,

Erich

Re: integrating MQX with PE

manu_00 — Mon, 29 Oct 2012 15:37:33 GMT

Hey Erich,

thanks for your answer. UNfortunetely that isn’t the problem. I have generated the code before. It only occurs when I am adding the OS module…

Von: Erich Styger mailto:admin@community.freescale.com

Gesendet: Montag, 29. Oktober 2012 16:35

An: Gerstner, Manuel

Betreff: Re: Processor Expert Software - integrating MQX with PE

Freescale Community<https://community.freescale.com/index.jspa>

integrating MQX with PE

created by Erich Styger<https://community.freescale.com/people/BlackNight> in Processor Expert Software - View the full discussion<https://community.freescale.com/message/305188#305188>

Re: integrating MQX with PE

CrasyCat — Tue, 30 Oct 2012 10:15:42 GMT

Hello

Just my 2 cents on this one.

I am not an MQX specialist, but did you check if the path to the MQX header file have been added to the include paths?

The include paths are specified in the project settings dialog. The page where you can adjust them depends on the processor you are targeting.

If you are developing for Kinetis, the paths can be added to Arm ltd windows GCC C Compiler > Directories page.

If you are building for Coldfire, the paths can be added to the ColdFire Compler > Input page.

CrasyCat

Re: integrating MQX with PE

manu_00 — Wed, 31 Oct 2012 07:36:47 GMT

Hello,

thanks for the answer. Where can I find the include paths?

Manu

Re: integrating MQX with PE

vfilip — Mon, 05 Nov 2012 08:24:22 GMT

Hello,

right click on the project and use Properties menu command to access Project settings. The option you need should be available within "C/C++ Build" -> "Settings" menu. Details are attached.

best regards

Vojtech Filip

Processor Expert Support Team

Re: integrating MQX with PE

manu_00 — Mon, 05 Nov 2012 08:59:36 GMT

Thank you! the path is added but i still havbe the sam e problem...