topic Cannot repeat the work in PLC EtherCAT Master Reference Platform document based on TWR-P1025 in P-Series https://community.nxp.com/t5/P-Series/Cannot-repeat-the-work-in-PLC-EtherCAT-Master-Reference-Platform/m-p/257331#M557 <HTML><HEAD></HEAD><BODY><P>Dear all, </P><P>I am a beginner with TWR-P1025, and I would like to learn and repeat the work in PLC EtherCAT Master Reference Platform document with the freescale product of TWR-P1025. However, when I try to set the software/hardware working envirment, I confronted the problem that it cannot connect and start the master server.</P><P></P><P>Much more details are included in the attatchment.</P><P></P><P>Would you help me to solve this problem?</P><P></P><P>Thanks very much.</P></BODY></HTML> Tue, 05 Nov 2013 05:49:51 GMT jacobliang 2013-11-05T05:49:51Z Cannot repeat the work in PLC EtherCAT Master Reference Platform document based on TWR-P1025 https://community.nxp.com/t5/P-Series/Cannot-repeat-the-work-in-PLC-EtherCAT-Master-Reference-Platform/m-p/257331#M557 <HTML><HEAD></HEAD><BODY><P>Dear all, </P><P>I am a beginner with TWR-P1025, and I would like to learn and repeat the work in PLC EtherCAT Master Reference Platform document with the freescale product of TWR-P1025. However, when I try to set the software/hardware working envirment, I confronted the problem that it cannot connect and start the master server.</P><P></P><P>Much more details are included in the attatchment.</P><P></P><P>Would you help me to solve this problem?</P><P></P><P>Thanks very much.</P></BODY></HTML> Tue, 05 Nov 2013 05:49:51 GMT https://community.nxp.com/t5/P-Series/Cannot-repeat-the-work-in-PLC-EtherCAT-Master-Reference-Platform/m-p/257331#M557 jacobliang 2013-11-05T05:49:51Z Re: Cannot repeat the work in PLC EtherCAT Master Reference Platform document based on TWR-P1025 https://community.nxp.com/t5/P-Series/Cannot-repeat-the-work-in-PLC-EtherCAT-Master-Reference-Platform/m-p/257332#M558 <HTML><HEAD></HEAD><BODY><P>Freescale offers LTIB Linux BSP for TWR-P1025 board, ISaGRAF PLC software is provided by QNX, please ask support from them.</P></BODY></HTML> Thu, 14 Nov 2013 08:14:36 GMT https://community.nxp.com/t5/P-Series/Cannot-repeat-the-work-in-PLC-EtherCAT-Master-Reference-Platform/m-p/257332#M558 yipingwang 2013-11-14T08:14:36Z