P-SeriesのトピックRe: Not able to execute u-boot.bin flashing via Target Tasks in codewarrior IDE for P1022

Not able to execute u-boot.bin flashing via Target Tasks in codewarrior IDE for P1022

aswinas017 — Tue, 21 Aug 2018 14:50:11 GMT

I found the cheat sheet for burning u-boot through target tasks.

This is as follows.

Import XML--> I did for P1022DS_NOR_FLASH.xml.

Then add action-program/verify.

Added my u-boot.bin file and selected the options which are mentioned in the cheat sheet.

Finally when I try to execute it , the execute button is disabled.

How can I resolve this issue?

If anybody experienced with p1022 and NOR flash, please share the details which you follow.

Or anybody tried u-boot.bin successfully please share the steps.

Thanks dudes.

Re: Not able to execute u-boot.bin flashing via Target Tasks in codewarrior IDE for P1022

Pavel — Wed, 22 Aug 2018 04:29:03 GMT

The simplest way is the following:

Create a CodeWarrior Bareboard Project. See the ClipBoard04.jpg file.

Set "Run Configuration" to this project.

See attached Clipboard02.jpg.file.

Have a great day,
Pavel Chubakov

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------