topic Re: P1010 booting from SPI in P-Series https://community.nxp.com/t5/P-Series/P1010-booting-from-SPI/m-p/238102#M370 <HTML><HEAD></HEAD><BODY><P>Have you had a chance to look at this Application Note?: <A href="http://www.freescale.com/files/32bit/doc/app_note/AN3659.pdf">http://www.freescale.com/files/32bit/doc/app_note/AN3659.pdf</A></P><P><BR /> </P></BODY></HTML> Mon, 06 May 2013 14:59:10 GMT roybieda 2013-05-06T14:59:10Z P1010 booting from SPI https://community.nxp.com/t5/P-Series/P1010-booting-from-SPI/m-p/238100#M368 <HTML><HEAD></HEAD><BODY><P>Hi to all!</P><P>Please, help me)</P><P>I can't understand how to boot my project code into SPI Flash.</P><P>As I know, I need to create a configuration file and my user code image. How can I do this using Code Warrior IDE?)</P></BODY></HTML> Sat, 23 Mar 2013 15:05:23 GMT https://community.nxp.com/t5/P-Series/P1010-booting-from-SPI/m-p/238100#M368 tsybezoff 2013-03-23T15:05:23Z Re: P1010 booting from SPI https://community.nxp.com/t5/P-Series/P1010-booting-from-SPI/m-p/238101#M369 <HTML><HEAD></HEAD><BODY><P>Some related information can be found in Targeting_PA_Processors.pdf, section 6.1 Working With Flash Programmer and appendix C Memory Configuration Files. The document is in the CodeWarrior installation directory, C:\Program Files\Freescale\CW PA v10.x\PA\Help\PDF.</P></BODY></HTML> Fri, 29 Mar 2013 09:50:02 GMT https://community.nxp.com/t5/P-Series/P1010-booting-from-SPI/m-p/238101#M369 lunminliang 2013-03-29T09:50:02Z Re: P1010 booting from SPI https://community.nxp.com/t5/P-Series/P1010-booting-from-SPI/m-p/238102#M370 <HTML><HEAD></HEAD><BODY><P>Have you had a chance to look at this Application Note?: <A href="http://www.freescale.com/files/32bit/doc/app_note/AN3659.pdf">http://www.freescale.com/files/32bit/doc/app_note/AN3659.pdf</A></P><P><BR /> </P></BODY></HTML> Mon, 06 May 2013 14:59:10 GMT https://community.nxp.com/t5/P-Series/P1010-booting-from-SPI/m-p/238102#M370 roybieda 2013-05-06T14:59:10Z