Security Engine inside P5040

weizhao — Wed, 22 Jun 2016 18:52:22 GMT

Hi,

We're using P5040 QorIQ Integrated Multicore Communication Processor in our products. According to P5040 manual, there is a security engine inside P5040, and we'd like to use i as Random Number Generator. Is there any application note for the security engine using ?

Thanks,

Wei

Re: Security Engine inside P5040

r8070z — Thu, 23 Jun 2016 10:00:25 GMT

Have a great day,

There is separate P5040 Security (SEC) Reference Manual on the P5040 web page

http://www.nxp.com/products/microcontrollers-and-processors/power-architecture-processors/qoriq-power-architecture-processors/qoriq-p5040-5021-64-bit-dual-and-quad-core-communications-processors:P5040?&fpsp=1&tab=Documentation_Tab

There are application notes for the SEC 2.0 and SEC 3.x but it is not so useful because the P5040 has SEC rev. 4.2. You can search for the security training courses on the NXP site. For example see “Introduction to Security Acceleration in QorIQ Processors”

https://community.nxp.com/servlet/JiveServlet/downloadBody/331881-102-1-267794/DES-N1856%20Security%20101%20Introduction%20to%20Security%20Acceleration%20in%20QorIQ%20Processors.pdf

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

P-SeriesのトピックRe: Security Engine inside P5040

Security Engine inside P5040

Re: Security Engine inside P5040