P-SeriesのトピックRe: P1012 HDLC microcode https://community.nxp.com/t5/P-Series/P1012-HDLC-microcode/m-p/508956#M3183 <HTML><HEAD></HEAD><BODY><P>Thanks for your help.</P></BODY></HTML> Fri, 29 Jan 2016 05:03:22 GMT guxg 2016-01-29T05:03:22Z P1012 HDLC microcode https://community.nxp.com/t5/P-Series/P1012-HDLC-microcode/m-p/508954#M3181 <HTML><HEAD></HEAD><BODY><P>Hello everyone, now I use P1012 platform. I want to set ucc1,ucc3,ucc5, ucc7 to HDLC mode but I'm not sure whether it&nbsp; need adapt microcode. If so, how do I get the firmware. thanks!!!</P></BODY></HTML> Fri, 22 Jan 2016 08:54:04 GMT https://community.nxp.com/t5/P-Series/P1012-HDLC-microcode/m-p/508954#M3181 guxg 2016-01-22T08:54:04Z Re: P1012 HDLC microcode https://community.nxp.com/t5/P-Series/P1012-HDLC-microcode/m-p/508955#M3182 <HTML><HEAD></HEAD><BODY><P><BR />Have a great day,</P><P></P><P>You do&nbsp; not need adapt the microcode. </P><P>The P1012 QE requires for the downloadable microcode. I guess you already have the microcode and can download it. In any case you can read app. note AN3946 “Downloading Microcode On QUICC Engine™ Block-Enabled Devices” in order to know where to get the microcode and how to download it. This app. note available on the NXP site </P><P><A href="http://www.nxp.com/products/microcontrollers-and-processors/power-architecture-processors/qoriq-power-architecture-processors/qoriq-p1021-12-single-and-dual-core-multi-protocol-communications-processors:P1021?fpsp=1&amp;tab=Documentation_Tab">http://www.nxp.com/products/microcontrollers-and-processors/power-architecture-processors/qoriq-power-architecture-processors/qoriq-p1021-12-single-and-dual-core-multi-protocol-communications-processors:P1021?fpsp=1&amp;tab=Documentation_Tab</A></P><P>The original microcode for the P1012 had supported HDLC already. How to configure UCC for HDLC on the P1021/P1012 is described in the QUICC Engine Block Reference Manual with Protocol Interworking, Rev. 7 which also available on the same web page.</P><P></P><P></P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 22 Jan 2016 10:41:22 GMT https://community.nxp.com/t5/P-Series/P1012-HDLC-microcode/m-p/508955#M3182 r8070z 2016-01-22T10:41:22Z Re: P1012 HDLC microcode https://community.nxp.com/t5/P-Series/P1012-HDLC-microcode/m-p/508956#M3183 <HTML><HEAD></HEAD><BODY><P>Thanks for your help.</P></BODY></HTML> Fri, 29 Jan 2016 05:03:22 GMT https://community.nxp.com/t5/P-Series/P1012-HDLC-microcode/m-p/508956#M3183 guxg 2016-01-29T05:03:22Z