P-SeriesのトピックRe: uboot,dtb,kernel and RootFileSystem from MicroSD

uboot,dtb,kernel and RootFileSystem from MicroSD

manoloruiz — Mon, 16 May 2016 09:48:32 GMT

Hi,

I want to load everything from a MicroSD. Is it possible? I tried to load the uboot from MicroSD. But I would like to know if I can load everything together from the flash.

thanks.

Re: uboot,dtb,kernel and RootFileSystem from MicroSD

bpe — Mon, 16 May 2016 10:56:17 GMT

Once the system booted into u-Boot, the rest is done by u-Boot commands. Depending on how your SD card is partitioned and formatted, you can read Linux and DTB images into memory with mmc read, ext2load or fatload commands. Linux can use

an SD/MMC card directly as a root filesystem device. Pre-u-Boot SD card preparation steps are described here:

Submit Form

For required u-Boot CLI commands refer to your board deployment guide:

Submit Form

Have a great day,
Platon

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: uboot,dtb,kernel and RootFileSystem from MicroSD

jian_jiang — Wed, 31 Aug 2016 06:37:18 GMT

Yes. You can load everything from a MicroSD.

You can learn how to build and install the NXP Linux OS BSP by i.MX_Linux_User's_Guide.pdf (in the L4.1.15_1.1.0_LINUX_DOCS)

i.MX 6Quad SABRE Development Board|NXP

All the best

Jian Jiang