topic Re: SE050 secure element SDK test in Other NXP Products

SE050 secure element SDK test

bi_jian — Mon, 21 Sep 2020 02:54:01 GMT

I'm using SE050 secure element and I know the T1oI2C protocol stack will add header/CRC to the APDU and Tx/Rx data over I2C and do something else.

So how to test the T1oI2C protocol stack? is there any tool or auto test framework that NXP is using or suggests?

Re: SE050 secure element SDK test

Kan_Li — Mon, 21 Sep 2020 07:44:36 GMT

Hi @bi_jian ,

The MW supports this protocol, please kindly refer to https://www.nxp.com/webapp/Download?colCode=SE050-PLUG-TRUST-MW for details.

Hope that helps,

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: SE050 secure element SDK test

bi_jian — Mon, 21 Sep 2020 10:26:26 GMT

Thanks，I have got the MW， but how to test it? how to make sure the protocol stack will add header/crc(etc.) correctly？any tool or test methods? what test method or tool does NXP use? we want to test the MW and our program.

Re: SE050 secure element SDK test

Kan_Li — Fri, 25 Sep 2020 02:35:14 GMT

Hi @bi_jian ,

Actually each version of MW is validated before release, including the T1oI2C protocol stack, otherwise the demos based on this MW can not work well with SE050, right? Why do you want to redo the tests on your side? any special requirement? Please kindly clarify.

Best Regards,

Kan