https://community.nxp.com/t5/Other-NXP-Products/Resistance-Resolution-NHS3152/m-p/1149664#M9234 <P>Hello everyone,</P><P>I have a question/problem regarding the resistance measurement of the NHS3152.&nbsp;</P><P>The data sheet advertises a Resolution of 0,83 Ohm at R(min) with the I2D-Range 250uA. The potentiometer I am using is working near the 400Ohm R(min), but I am not even close to 0,83Ohm resolution, even with max I2D conversion time. The steps are more like a couple of hundred.</P><P>Does anyone have advise what is necessary to get 0,83Ohm resolution?</P><P>&nbsp;</P><P>Thanks</P> Mon, 07 Sep 2020 10:14:32 GMT nicolas_woedy 2020-09-07T10:14:32Z https://community.nxp.com/t5/Other-NXP-Products/Resistance-Resolution-NHS3152/m-p/1149664#M9234 <P>Hello everyone,</P><P>I have a question/problem regarding the resistance measurement of the NHS3152.&nbsp;</P><P>The data sheet advertises a Resolution of 0,83 Ohm at R(min) with the I2D-Range 250uA. The potentiometer I am using is working near the 400Ohm R(min), but I am not even close to 0,83Ohm resolution, even with max I2D conversion time. The steps are more like a couple of hundred.</P><P>Does anyone have advise what is necessary to get 0,83Ohm resolution?</P><P>&nbsp;</P><P>Thanks</P> Mon, 07 Sep 2020 10:14:32 GMT https://community.nxp.com/t5/Other-NXP-Products/Resistance-Resolution-NHS3152/m-p/1149664#M9234 nicolas_woedy 2020-09-07T10:14:32Z https://community.nxp.com/t5/Other-NXP-Products/Resistance-Resolution-NHS3152/m-p/1149733#M9237 <P>Found the issue, porblem is solved.</P> Mon, 07 Sep 2020 13:33:43 GMT https://community.nxp.com/t5/Other-NXP-Products/Resistance-Resolution-NHS3152/m-p/1149733#M9237 nicolas_woedy 2020-09-07T13:33:43Z