topic DVK for Robotic Application in Other NXP Products

DVK for Robotic Application

i_ashok_s — Tue, 19 Mar 2019 01:27:08 GMT

Hi, I am newbie for iMX development. Since my application is related to some robot application development, i am looking forward suggestions on it. I have to choose the iMX based development board for my robotic application. My application include multiple controls handling like motor, camera image, radar sensor data....Please suggest me the best development board to start with for this type of application. It would be highly appreciated.

Thank in advance.

Re: DVK for Robotic Application

Bio_TICFSL — Tue, 19 Mar 2019 18:01:19 GMT

Hello A,

You can start with the i.MX6 and see the options for your board, and latest linux BSP,

i.MX 6Quad Applications Processors | Quad Arm® Cortex®-A9 | NXP

Or you can start with PICO pi

https://www.technexion.com/products/pico-baseboards/detail/PICO-PI/

Regards

Re: DVK for Robotic Application

i_ashok_s — Wed, 20 Mar 2019 02:26:57 GMT

Hi,

Thanks for your reply. I found iMX6 based board support applications required high performance.

I am going through it but since i tried to find some example application for robot using iMX6 processor, i didn't find it. So i am just worrying about to get community support in case i stuck somewhere while development.....

since i am a newbie for this stage, I was thinking to go with iMX6 SABRE dev kit, but didnt find any support example for development,so here is my confusion get raised.

I hope, you understand my concern. Please suggest.

Thanks n Regards.

Re: DVK for Robotic Application

Bio_TICFSL — Wed, 20 Mar 2019 14:59:04 GMT

Hi,

You can try Robot Operating System.

Interfacing Depth Sensors with ROS on NXP i.MX6 boards

https://community.nxp.com/docs/DOC-330148

Regards