Other NXP ProductsのトピックRe: bdi3000 configuration for MPC8313E-RDB?

bdi3000 configuration for MPC8313E-RDB?

MartinL — Fri, 06 Nov 2009 20:43:21 GMT

Hi,

Does anyone have a working bdi2000/3000 configuration for the MPC8313E-RDB (rev c) dev. board?

I need it to have DDR and NOR flash support so that I can flash a new bootloader into NOR.

Thanks.

Br, Martin

Re: bdi3000 configuration for MPC8313E-RDB?

TedMarshall — Sat, 07 Nov 2009 03:50:10 GMT

I believe the attached should work. I was working with a borrowed BDI2000 (which I no longer have) and later with it on a custom board bit I believe this will work with the RDB.

BTW, you don't need SDRAM to program the flash. Using the workspace should speed it up but I was never able to get programming to work with the workspace, even with SDRAM properly configured.

Good luck.

bdi-mpc8313erdb.zip

Message Edited by t.dowe on 2009-11-08 10:29 PM

Re: bdi3000 configuration for MPC8313E-RDB?

MartinL — Mon, 09 Nov 2009 20:15:45 GMT

Thanks for the configuration!

Flash programming worked like a charm - even without SDRAM configured. Apparently the default workspace is ok with the bdi3000.

Re: bdi3000 configuration for MPC8313E-RDB?

precisionman — Tue, 23 Aug 2022 17:48:41 GMT

hi,

i'm looking for configure file for mpc8313e : bdi-mpc8313erdb.zip

do you still have this file?

greatly appreciated.

thx, Tim

Re: bdi3000 configuration for MPC8313E-RDB?

precisionman — Tue, 23 Aug 2022 17:50:00 GMT

hi,

i'm looking for the configure file for mpc8313e

bdi-mpc8313erdb.zip

do you still have it?

thanks a million.

tim