Problems！FreeMater communication through CAN！

pengjianxin — Sat, 17 Jun 2017 07:47:30 GMT

hello：

i intergrated the freemaster codes into my application code，and download the S19 file into the evaluation bord.

the communication configuration is ：

(1)short-inter mode；

(2) the FMSTR_Poll() is in for(;;)，FMSTR_Isr() is in can receive interrupt function; FMSTR_Init()；

(3)FlexCAN, SPC56**

Then, the result of “Test Connection”：

" target is alive （responded to ping）"

the standard frame 0x7aa send and the response is received,but in the next step i click the button " STOP " to start communication，the results is below:

" Can not detec the board information！ the communication will paused. Error code: 0x858e0003

I have several questions：

(1) Freemater through CAN， the protocol of communication is XCP/CCP？ because i do not find the protocol in the specification，please confirm the information。

(2) without can protocol，how can i fix the problem？

looking forward to your response,My E@mal is" flesher@126.com ", thank you.

topic Problems！FreeMater communication through CAN！ in Other NXP Products

Problems！FreeMater communication through CAN！