topic Re: Connecting Audio USB controller in VL812 USB HUB in Other NXP Products

Connecting Audio USB controller in VL812 USB HUB

mdmubdiulhasan — Tue, 13 Jun 2017 06:56:03 GMT

Hello ,

Could you kindly recommend me anyNXP kit that can be applicable for MEMS microphone ?

This kit should be USB interfaced with PC, my plan is to connect it to VL812 USB 3.0 Hub Controller .

Is it possible to make analog MEMS microphone interface ?

Re: Connecting Audio USB controller in VL812 USB HUB

jorge_a_vazquez — Wed, 21 Jun 2017 21:36:38 GMT

Hi Md Mubdiul Hasan

If you are looking for a board that includes Audio interface and USB support, I would recommend you our FRDM-K66F evaluation board. This board include a Audio Codec and USB support, please find more information in our web page:

FRDM-K66F|Freedom Development Platform|Kinetis® MCUs|NXP

Hope this information could help you.

Best Regards

Jorge Alcala

Re: Connecting Audio USB controller in VL812 USB HUB

mdmubdiulhasan — Thu, 22 Jun 2017 00:06:55 GMT

Thank you very much sir Antonio.

This board looks applicable, does it compatible with these board?

1. DEM-PCM2912AEVM DEM-PCM2912AEVM Evaluation Module | TI.com

2. http://www.semiconductorstore.com/cart/pc/viewPrd.asp?idproduct=50527

Comparing these board, what difficulties would arise to develop with FRDM-K66F?