topic Re: MPC8641D: Starting core1 in Other NXP Products https://community.nxp.com/t5/Other-NXP-Products/MPC8641D-Starting-core1/m-p/149076#M464 <HTML><HEAD></HEAD><BODY><P>Well solved it.</P><P>core0 may write to all memory. I am copying a short stub to 0x100 of core1 (&gt; 0x10000100 of core0). This stub makes an absolute jump to its real location.</P></BODY></HTML> Fri, 30 Mar 2012 03:12:52 GMT bastian_schick 2012-03-30T03:12:52Z MPC8641D: Starting core1 https://community.nxp.com/t5/Other-NXP-Products/MPC8641D-Starting-core1/m-p/149075#M463 <HTML><HEAD></HEAD><BODY><P>Hi</P><P>I have a problem to start the second core of the MPC8641D (hpcn board).</P><P>I want to use low memory offset and I wonder does this collide with setting the BPTR (boot segment) ?</P><P>&nbsp;</P><P>Also: Is there a way to access the 2nd 256MB by core 0</P><P>&nbsp;</P><P>TIA</P><P>&nbsp;</P><P>42BS</P><P>&nbsp;</P></BODY></HTML> Tue, 27 Mar 2012 03:09:58 GMT https://community.nxp.com/t5/Other-NXP-Products/MPC8641D-Starting-core1/m-p/149075#M463 bastian_schick 2012-03-27T03:09:58Z Re: MPC8641D: Starting core1 https://community.nxp.com/t5/Other-NXP-Products/MPC8641D-Starting-core1/m-p/149076#M464 <HTML><HEAD></HEAD><BODY><P>Well solved it.</P><P>core0 may write to all memory. I am copying a short stub to 0x100 of core1 (&gt; 0x10000100 of core0). This stub makes an absolute jump to its real location.</P></BODY></HTML> Fri, 30 Mar 2012 03:12:52 GMT https://community.nxp.com/t5/Other-NXP-Products/MPC8641D-Starting-core1/m-p/149076#M464 bastian_schick 2012-03-30T03:12:52Z