topic Re: SBC Controller UJA1075A software-support in Other NXP Products

SBC Controller UJA1075A software-support

c_fischer — Wed, 22 Mar 2017 12:08:33 GMT

Hi, all ! I want to use a SBC Controller UJA1075A in a non-automotive solution. My question is, is there a little bit software-support for this part, for example a LIB-File or an INCLUDE File for C ? Thanks. Claus

Re: SBC Controller UJA1075A software-support

TomasVaverka — Mon, 27 Mar 2017 13:32:03 GMT

Hello Claus,

There is no support on SW, but I attached some helpful libraries/driver examples.

Hope it helps.

Best regards,

Tomas

Re: SBC Controller UJA1075A software-support

c_fischer — Tue, 28 Mar 2017 09:40:26 GMT

Hello, Tomas,

Yeah! It's more, more than I expected. Thanks!

So I do not have to reinvent the bike.

I know, that such SBC's with combined LIN/LON receivers were designed especially for automotive applicaions.

It's not easy to buy it, and you must buy at least 2.000 pieces at once. this will be my annual requirements.

I hope, I can get some samples from NXP for my prototypes.

Once again: Thank You !!

Best regards,

Claus

Re: SBC Controller UJA1075A software-support

nikolayludov — Sun, 14 May 2017 12:03:06 GMT

Hi Tomas , can you help me with the software "uja 1168" or, for example, lib file or include file for C ?

Re: SBC Controller UJA1075A software-support

kerwinsun — Wed, 07 Feb 2018 08:35:20 GMT

I also look for the driver examples of UJA1076,you help me too.Thank you very much!

Re: SBC Controller UJA1075A software-support

vinicius_olivei — Wed, 13 Mar 2019 09:39:55 GMT

Hello everyone,

Did anyone manage to implement this SBC? Is it possible to share the code of function void SpiSend(unsigned int *tx) ?
I have some troubles to activate CAN 5V, for example I send 0x2C00 but nothing happens.

Is there any way to test if the communication is working properly?

Best.