topic What do we need in Other NXP Products

What do we need

gng23 — Fri, 15 Jul 2016 08:30:20 GMT

I have some question about the product, JN5168-001-M00;

- In case where we prefer the product, what do we need separately?

- Is Code Warrior only option to program the product? Are we going to need other software/s (free or not)?

- Are there any alternative of Code warrior. If your answer is “no” what is the perpetual price of the CW

- What kind of cable or hardware components do we need for programming the module?

- As programming, which technology will we use? (UART,I2C..)

- Can we develop our MAC, Routing or APP layers on only 802.15.4 PHY layer

- What is the most economical solution for us?

- Which do you recommend for us, JN5168 or JN5168-001-M00

Thank you in advance for your interests

Re: What do we need

mario_castaneda — Mon, 25 Jul 2016 15:31:31 GMT

Hi Gungor,

It's depend what do you need, the final application. for example the JN5168-001-M00 has a printed antenna.

You will need Beyond Studio, and if your applications is about zigbee, you will need that specific SW.

The JN5168-001-M00 can be programable by JTAG.

Could you please tell us your final application?

We have another solutions like KW40, you can take a look

FRDM-KW40Z|Freedom Development Platform|Kinetis MCU|NXP

Hope It helps

Mario

Re: What do we need

gng23 — Tue, 26 Jul 2016 16:38:59 GMT

Dear Mario,

Thank you for your reply.

In fact, we have two final projects. First, a smart lighting application

with ZigBee for buildings.

Secondly, a smart city application , the MAC and Routing layers of which

will be selected or prepared by us.

And, could you explain what means "specific SW" for ZigBee. Is it a stack

or another software?

Thank you for your interest.

Kind regards,

Güngör

2016-07-25 18:33 GMT+03:00 mario_castaneda <admin@community.freescale.com>:

NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
What do we need
reply from Mario Ignacio Castaneda Lopez
<https://community.nxp.com/people/mario_castaneda?et=watches.email.thread>
in Other NXP Solutions - View the full discussion
<https://community.nxp.com/message/815707?et=watches.email.thread#comment-815707>

Re: What do we need

mario_castaneda — Tue, 26 Jul 2016 21:12:44 GMT

Hi Gungor,

The beyond Studio will help you developing your applications and you will need the ZigBee Ligth Link software

ZigBee Light Link|NXP

Note: You only be able to work with all the applications standards, like ZigBee Smart Energy.

You can make a submit request for get the Zigbee 3.0 and follow the process

ZigBee 3.0|NXP

Hope it Helps

Mario