TSS Freemaster Question

haroldvogel — Fri, 08 Apr 2016 17:20:57 GMT

Receive that following warning 'missing braces around initializer' TSS_Freemaster.C

the code is:

#if FMSTR_USE_TSA

/* FreeMASTER TSA table for TSS variables */

//FreeMASTER interface to write

FMSTR_WRITE_STRUCT)

FMSTR_WRITE_STRUCT, indexdata, FMSTR_TSA_UINT32)

FMSTR_WRITE_STRUCT, flagreg, FMSTR_TSA_UINT32)

FMSTR_CONFIG_STRUCT)

FMSTR_CONFIG_STRUCT, ptr_size, FMSTR_TSA_UINT8)

FMSTR_CONFIG_STRUCT, low_bit_mask, FMSTR_TSA_UINT8)

//TSS system config menu

TSS_CSSystem)

TSS_CSSystem, Faults, FMSTR_TSA_UINT8)

TSS_CSSystem, SystemConfig, FMSTR_TSA_UINT8)

TSS_CSSystem, NSamples, FMSTR_TSA_UINT8)

TSS_CSSystem, DCTrackerRate, FMSTR_TSA_UINT8)

TSS_CSSystem, SlowDCTrackerFactor, FMSTR_TSA_UINT8)

TSS_CSSystem, ResponseTime, FMSTR_TSA_UINT8)

TSS_CSSystem, StuckKeyTimeout, FMSTR_TSA_UINT8)

TSS_CSSystem, LowPowerElectrode, FMSTR_TSA_UINT8)

TSS_CSSystem, LowPowerElectrodeSensitivity, FMSTR_TSA_UINT8)

TSS_CSSystem, SystemTrigger, FMSTR_TSA_UINT8)

// Keydetector 2 data

#if (TSS_USE_KEYDETECTOR_VERSION == 2)

#endif

//electrodes config menu

#if TSS_USE_DELTA_LOG

#endif

#if TSS_USE_SIGNAL_LOG

#endif

#if TSS_USE_INTEGRATION_DELTA_LOG

#endif

#if ((TSS_USE_NOISE_MODE == 1) && (TSS_USE_NOISE_SIGNAL_LOG == 1))

#endif

//controls menu

#if TSS_N_CONTROLS > 0

#endif

// TSS version information

#endif

Not sure if I should put a ';' after each function or what should be done. This is code that I received from TSS application.

I have attached the file.

Original Attachment has been moved to: TSS_Freemaster.c.zip

Other NXP ProductsのトピックTSS Freemaster Question