topic MPC5744P Master code in Other NXP Products https://community.nxp.com/t5/Other-NXP-Products/MPC5744P-Master-code/m-p/472996#M3380 <HTML><HEAD></HEAD><BODY><P><SPAN style="font-family: Arial, Helvetica, sans-serif; font-size: 10pt;">Iam working on MPC5744p Controller. I am trying to implement the SPI Master driver code for same controller, for this i selected DSPI0(SPI0) and implemented SPI in this way as shown in " MPC5744_SPI_master docx." after flasing i connected to CRO to check ransfered data with the pin&nbsp; MISO but Master is not showing anything from MPC5744P board when i transmitted 'A'.&nbsp; SO please help me on this. Tell me is there any mistakes in this code and need to modify anything.? Can you please send the code for SPI Master . Tell me if any links are there .&nbsp; after this iam trying to transfer from MPC5744P(Master ) to AVR(Slave) controller but garbage value is coming on UART. </SPAN></P><P> </P><P> </P><P> </P><P> </P><P><SPAN style="font-family: Arial, Helvetica, sans-serif; font-size: 10pt;">Regards, </SPAN></P><P> </P><P><SPAN style="font-family: Arial, Helvetica, sans-serif; font-size: 10pt;">Padmalatha</SPAN></P></BODY></HTML> Wed, 09 Dec 2015 14:25:08 GMT padmalathagudip 2015-12-09T14:25:08Z MPC5744P Master code https://community.nxp.com/t5/Other-NXP-Products/MPC5744P-Master-code/m-p/472996#M3380 <HTML><HEAD></HEAD><BODY><P><SPAN style="font-family: Arial, Helvetica, sans-serif; font-size: 10pt;">Iam working on MPC5744p Controller. I am trying to implement the SPI Master driver code for same controller, for this i selected DSPI0(SPI0) and implemented SPI in this way as shown in " MPC5744_SPI_master docx." after flasing i connected to CRO to check ransfered data with the pin&nbsp; MISO but Master is not showing anything from MPC5744P board when i transmitted 'A'.&nbsp; SO please help me on this. Tell me is there any mistakes in this code and need to modify anything.? Can you please send the code for SPI Master . Tell me if any links are there .&nbsp; after this iam trying to transfer from MPC5744P(Master ) to AVR(Slave) controller but garbage value is coming on UART. </SPAN></P><P> </P><P> </P><P> </P><P> </P><P><SPAN style="font-family: Arial, Helvetica, sans-serif; font-size: 10pt;">Regards, </SPAN></P><P> </P><P><SPAN style="font-family: Arial, Helvetica, sans-serif; font-size: 10pt;">Padmalatha</SPAN></P></BODY></HTML> Wed, 09 Dec 2015 14:25:08 GMT https://community.nxp.com/t5/Other-NXP-Products/MPC5744P-Master-code/m-p/472996#M3380 padmalathagudip 2015-12-09T14:25:08Z