ads model

hadi3000 — Tue, 28 Jul 2026 12:08:27 GMT

i downloaded ads model forMRFE6VS25NR1 but it did not work due to this error

Model `FSL_MRFE6VS25N_FET2.FET2M1' (defined in file 'C:/Users/hadih/OneDrive/Desktop/NXP/MRFE6VS25N_Level1_Rev1_DK//circuit/models/fsl_MRFE6VS25N_pkg_netlists.net' around line 31): `FSLRFPK_FET2_v1' is an undefined primitive device.

is it broken?

this is the element page

https://www.nxp.com/products/radio-frequency-rf/legacy-rf/legacy-rf-power/1-8-2000-mhz-25-w-50-v-wideband-rf-power-ldmos-transistors:MRFE6VS25N

Re: ads model

RafaR — Tue, 28 Jul 2026 17:05:09 GMT

Hello hadi3000

Good day!

This appears to be you not installing RF High power Model Kit before using single product model.

https://www.nxp.com/products/rf/rf-high-power-models/models-for-ads-keysight-advanced-design-system:RF_HIGH_POWER_MODELS_KEYSIGHT

Our models are two part :

RF High power Model Kit
Product Model Design Kit

Both parts are required to simulate device.

If you already installed the High power Model Kit, please check the TroubleShootingADSInstallation Problems and verify that the FSL_TECH_INCLUDE element exists in the top-level circuit.

You can also find the section on common installation errors here.

https://www.nxp.com/docs/en/companyinformation/OVERVIEW_MDL_ADS_DESIGN_KIT.pdf

I hope this information has helped you, please let me know if you need help with anything else.

Have a great day and best of luck.

topic Re: ads model in Other NXP Products

ads model

Re: ads model