Other NXP ProductsのトピックRe: Online Provisioning

Online Provisioning

NEXUSNERD — Wed, 15 Jul 2026 13:31:22 GMT

I have successfully completed the online Provisioning on my board , now what I have to do is I have extract the cert or key or possible read the blob which is created after the edge2lock provisioning so is it possible to do that ?

Using Frdm i.mx93

Re: Online Provisioning

AldoG — Thu, 16 Jul 2026 19:10:57 GMT

Hello,

You may use pkcs11-tool for this, please have a look to the documentation here:
https://github.com/nxp-imx/imx-smw/blob/release/version_5.x/Documentations/user_guide/pkcs11/pkcs11_tool_user_guide.md

Also, I would suggest to have a look to the SMW user manual:
https://github.com/nxp-imx/imx-smw/blob/release/version_5.x/Documentations/user_manual/SMW_UserManual_UM12513.pdf

Best regards/Saludos,
Aldo.

Re: Online Provisioning

NEXUSNERD — Mon, 20 Jul 2026 07:17:18 GMT

Hi Aldo,

Thank you for your reply.

I have already tried using pkcs11-tool with the SMW PKCS#11 provider after successful online provisioning on the FRDM i.MX93, but I cannot see or read the provisioned certificate or key.

Could you please clarify:

Are the provisioned certificate and private key expected to be accessible through the PKCS#11 interface?
If not, are they stored securely in ELE and intended to be used only through PSA Crypto/SMW APIs without being exported?
My goal is to use the provisioned credentials for mutual TLS.
Thank you.