RF LDMOS power amplifiers

RF_AK — Mon, 12 Jan 2026 12:14:51 GMT

Please share the power-up sequence to turn ON RF and the power-down sequence to turn OFF RF for the following RF LDMOS power amplifiers, along with any testing manual or application note:
A2T08VD020NT1
A2V09H300-04NR3

Re: RF LDMOS power amplifiers

RafaR — Mon, 12 Jan 2026 16:37:40 GMT

Hello RF_AK

Good day!

Below I share the following steps, listing them in a more general way so that you can use them as a guide on the different devices in our family.

Startup Sequence:

Ensure all supplies are at 0V.
Gate bias OFF: Ensure gate voltage near –6 V to keep device in cutoff.
Turn on the 48V drain supply.
Apply 8V to the regulator input.
Apply RF signal.

Power-down Sequence:

Remove RF signal
Return to -6V to turn off
Ramp down Vdd to 0 V.
Ensure all supplies are at 0V.

Unfortunately, we don't have application notes that cover this in more detail. The only documentation we have is available on our official website. We apologize for the inconvenience.

I hope this information has helped you, please let me know if you need help with anything else.

Have a great day and best of luck.

topic RF LDMOS power amplifiers in Other NXP Products

RF LDMOS power amplifiers

Re: RF LDMOS power amplifiers