SBC Reporting SPI Clock and CRC Error Sporadically

Sivahari — Fri, 02 Jan 2026 14:15:24 GMT

Hi Nxp,

We are facing the SPI Clock error and CRC Error sporadically when controlling the SBC CS Pin via GPIO (Changing CS High/Low through SW).

But I was not facing this error when configuring CS as Peripheral engine. So, what could be reason for this sporadic behavior?

DSO Image For your Reference

Please assist me if any additional configurations (pull up, pull down, Clock drive strength etc.) are required.

Thanks for Support.

Other NXP ProductsのトピックSBC Reporting SPI Clock and CRC Error Sporadically