topic Problem while loading code to flash(Failed to enter into background mode) in Other NXP Products https://community.nxp.com/t5/Other-NXP-Products/Problem-while-loading-code-to-flash-Failed-to-enter-into/m-p/313625#M3038 <HTML><HEAD></HEAD><BODY><P>Hai,</P><P></P><P>I am using PXS3020 for my project. I was testing the peripherals' functionality. I am using PE Micro multilink universal for debugging.</P><P></P><P>Everything was fine until today morning. Now I am not able to load the executable file into flash memory. I did not change anything in code from yesterday.&nbsp; The screenshot of the error message is attached.</P><P></P><P>The peripheral that I enabled last is FlexPWM (Enabled Auxillary clock 0 - 16 MHz Internal RC Oscillator), and with PWM it was working until yesterday night. </P><P></P><P>Does auxiliary clock 0 create any problem? Kindly help me to solve the issue.</P><P></P><P>Thanks &amp; Regards,</P><P>Mohammed Shibin</P></BODY></HTML> Tue, 03 Jun 2014 12:47:53 GMT mohammedshibin 2014-06-03T12:47:53Z Problem while loading code to flash(Failed to enter into background mode) https://community.nxp.com/t5/Other-NXP-Products/Problem-while-loading-code-to-flash-Failed-to-enter-into/m-p/313625#M3038 <HTML><HEAD></HEAD><BODY><P>Hai,</P><P></P><P>I am using PXS3020 for my project. I was testing the peripherals' functionality. I am using PE Micro multilink universal for debugging.</P><P></P><P>Everything was fine until today morning. Now I am not able to load the executable file into flash memory. I did not change anything in code from yesterday.&nbsp; The screenshot of the error message is attached.</P><P></P><P>The peripheral that I enabled last is FlexPWM (Enabled Auxillary clock 0 - 16 MHz Internal RC Oscillator), and with PWM it was working until yesterday night. </P><P></P><P>Does auxiliary clock 0 create any problem? Kindly help me to solve the issue.</P><P></P><P>Thanks &amp; Regards,</P><P>Mohammed Shibin</P></BODY></HTML> Tue, 03 Jun 2014 12:47:53 GMT https://community.nxp.com/t5/Other-NXP-Products/Problem-while-loading-code-to-flash-Failed-to-enter-into/m-p/313625#M3038 mohammedshibin 2014-06-03T12:47:53Z Re: Problem while loading code to flash(Failed to enter into background mode) https://community.nxp.com/t5/Other-NXP-Products/Problem-while-loading-code-to-flash-Failed-to-enter-into/m-p/313626#M3039 <HTML><HEAD></HEAD><BODY><P>Just to close this thread - we were informed by customer that the problem was caused by FPGA which was holding the the reset pin low. </P><P>Lukas</P></BODY></HTML> Fri, 06 Jun 2014 07:55:26 GMT https://community.nxp.com/t5/Other-NXP-Products/Problem-while-loading-code-to-flash-Failed-to-enter-into/m-p/313626#M3039 lukaszadrapa 2014-06-06T07:55:26Z