topic MPC5516 VLE is not working in WinIDEA in Other NXP Products

MPC5516 VLE is not working in WinIDEA

San72 — Mon, 03 Sep 2007 20:26:34 GMT

Hi,

I am using WinIDEA to debug my code on MPC5516EVB. Though the compiler generates the VLE code for my application I'm not able to test it. The start up code itself is not working for me. In the debugger initialization file i'm using the following steps

// Setup TLB3 (RAM) for VLE)
S "SPR"270) L 0x10030000 // MAS0 configured for TLB3
S "SPR"271) L 0xC0000400 // MAS1 (256K area)
S "SPR"272) L 0x00000020 // MAS2 (Cache inhibit, VLE)
S "SPR"273) L 0x4000003F // MAS3
I 7C0007A4 // tlbwe

But still its not working.

If anybody has already worked on it please gimme ur suggestions.

regards,

san

Re: MPC5516 VLE is not working in WinIDEA

dayve — Wed, 05 Sep 2007 01:54:57 GMT

Hey San,

Are you using the latest version of iSystem? Also what compiler are you using?

David

Re: MPC5516 VLE is not working in WinIDEA

tyc — Fri, 21 Sep 2007 07:35:17 GMT

I am go try to get up MPC5516EVB up and running as well with winIDEA. Is there any gotcha that I should looking out for?

Many thanks,
tyc

Re: MPC5516 VLE is not working in WinIDEA

CrasyCat — Fri, 21 Sep 2007 12:49:28 GMT

Hello

If you are running your application on WinIDEA, you need to get initialized variables copied from ROM to RAM at startup.

You need to create a ROM Image in that purpose. There is a FAQ around that on Freescale Web site.

Go to www.freescale.com and search for FAQ-27789.

I hope this helps a bit.

CrasyCat

Re: MPC5516 VLE is not working in WinIDEA

tyc — Mon, 11 Feb 2008 09:11:20 GMT

I have found that the standard compiler that comes with WinIDEA does not generate code for VLE. You may have to use a different compiler, such as Metrowerks, for VLE.