Other NXP ProductsのトピックRe: 56800E FLASH Programmer - Error Message https://community.nxp.com/t5/Other-NXP-Products/56800E-FLASH-Programmer-Error-Message/m-p/268301#M2832 <HTML><HEAD></HEAD><BODY><P>It looks more like a hardware problem.</P><P></P><P>Frist, please check whether USBTAP works well. </P><P>The old reversion of USBTAP susceptible to the ESD and the USBTAP is not able to drive The /TRST pin to HIGH level. </P><P>So,please pull up the /TRST pin of the JTAG connector. Does this work? </P><P><SPAN class="mce_paste_marker"></SPAN></P></BODY></HTML> Mon, 17 Jun 2013 09:52:50 GMT TICS_Fiona 2013-06-17T09:52:50Z 56800E FLASH Programmer - Error Message https://community.nxp.com/t5/Other-NXP-Products/56800E-FLASH-Programmer-Error-Message/m-p/268300#M2831 <HTML><HEAD></HEAD><BODY><P>Hello All.</P><P></P><P>I am hoping someone can help me out.&nbsp; I have a project that has been in production for a couple years now and uses the 56F8323.&nbsp; During production we use the USBTap and the standalone 56800E FLASH Programmer that came with the old Code Warrior Studio.</P><P></P><P>We currently programming a production run and about 1 out of 5 boards is getting the following error:</P><P></P><P><span class="lia-inline-image-display-wrapper" image-alt="ResetToDebug.JPG"><img src="https://community.nxp.com/t5/image/serverpage/image-id/39650i1108C65C3A68C9FD/image-size/large?v=v2&amp;px=999" role="button" title="ResetToDebug.JPG" alt="ResetToDebug.JPG" /></span></P><P>Anyone seen this message before?&nbsp; Any ideas what to look for on the board that would cause this error?</P><P></P><P>We have already tried the usual, Power, reset signal, clock signal and all seems normal.</P></BODY></HTML> Fri, 31 May 2013 20:30:44 GMT https://community.nxp.com/t5/Other-NXP-Products/56800E-FLASH-Programmer-Error-Message/m-p/268300#M2831 v_dave 2013-05-31T20:30:44Z Re: 56800E FLASH Programmer - Error Message https://community.nxp.com/t5/Other-NXP-Products/56800E-FLASH-Programmer-Error-Message/m-p/268301#M2832 <HTML><HEAD></HEAD><BODY><P>It looks more like a hardware problem.</P><P></P><P>Frist, please check whether USBTAP works well. </P><P>The old reversion of USBTAP susceptible to the ESD and the USBTAP is not able to drive The /TRST pin to HIGH level. </P><P>So,please pull up the /TRST pin of the JTAG connector. Does this work? </P><P><SPAN class="mce_paste_marker"></SPAN></P></BODY></HTML> Mon, 17 Jun 2013 09:52:50 GMT https://community.nxp.com/t5/Other-NXP-Products/56800E-FLASH-Programmer-Error-Message/m-p/268301#M2832 TICS_Fiona 2013-06-17T09:52:50Z