topic Re: About MCXC243 in Other NXP Products

About MCXC243

ravicha — Mon, 16 Dec 2024 06:54:37 GMT

how to pogram MCXC243 microcontroller

Alice_Yang — Mon, 16 Dec 2024 10:41:12 GMT

If my below reply not answer your question, please describe your question more detail.

IDE: MCUXprsso IDE

Debugger: MCU-LINK, or J-link

If just want to program an image, can use blhost.

Alice

ravicha — Tue, 17 Dec 2024 13:18:28 GMT

i am trying to load mcxc243 by using link 2 but i am getting below error

Alice_Yang — Wed, 18 Dec 2024 02:02:59 GMT

Thanks for your reply.

From your screenshots, you did not choose j-link on MCUXpresso, it is LinkServer debug probe.

Your board is demo board from NXP or your own board?

Please create a new MCUXpresso IDE workspace, and create a new project. Compile it. Then click below button to connect and debug.

Alice_Yang_0-1734487349288.png

Alice

ravicha — Wed, 18 Dec 2024 04:59:46 GMT

i select the same as u said but still get the same error

Alice_Yang — Wed, 18 Dec 2024 09:23:59 GMT

Please reply my below question, thanks.

Your board is demo board from NXP or your own board?

Please create a new MCUXpresso IDE workspace, and create a new project. Compile it. Then click below button to connect and debug.

And what debugger do you used?

Please take a video for your steps.

Alice

ravicha — Wed, 18 Dec 2024 12:31:13 GMT

i got the solution my controller memory get corrupted how to solve this to protect memory

Alice_Yang — Fri, 20 Dec 2024 09:49:52 GMT

Thanks for your reply.

So your board works well or not now?

If still can't work, please show more detail about the issue, thanks.

If locked, you can try to J-link command unlock to unlock. Detail please refer to:

Alice