Device Tree building

anilkandikonda — Wed, 27 Nov 2024 17:16:32 GMT

Hi team,

I am pretty new to this yocto and linux kernel.

I want to integrate ov5647 camera module into my system. I need help in building device tree, so that i can use that camera.
any steps and starting point where and how to start. how to modify the dtsi file,
what changes do i have to make to make it work.

any help on this is really appreciated.

Thanks,

Anil

Re: Device Tree building

Manuel_Salas — Tue, 03 Dec 2024 00:36:30 GMT

Hello @anilkandikonda

I hope you are doing very well.

Please take a look to the imx8mp-navq-ov5647-ov5640.dts.

Once, when you have modified your device tree, you can compile it in the kernel source.

For example, download the linux-imx kernel in your linux host machine:

git clone https://github.com/nxp-imx/linux-imx.git

Then, add your device tree to /linux-imx/arch/arm64/boot/dts/freescale/Makefile as example:

And copy your dts file under /linux-imx/arch/arm64/boot/dts/freescale/.

Generate the Yocto toolchain as described in Linux users guide (chapter 4.5.12 How to build U-Boot and Kernel in standalone environment).

Set the environment with the generated toolchain:

$source /opt/fsl-imx-xwayland/6.6-nanbield/environment-setup-aarch64-poky-linux

finally, go to the linux-imx folder and set the commands:

$make distclean $make clean $make menuconfig

In menuconfig, I recommend to select just the i.MX processor to just compile the desired device trees.

Finally:

$make dtbs

And the dtb will be generated under /linux-imx/arch/arm64/boot/dts/freescale/.

I hope this information can helps to you.

Best regards,

Salas.

topic Re: Device Tree building in Other NXP Products

Device Tree building

Re: Device Tree building