Other NXP ProductsのトピックRe: SBC FS26 state Flow

SBC FS26 state Flow

Naveen158 — Mon, 19 Aug 2024 07:08:17 GMT

Hello, its a bit difficult to understand the Simplified functional state diagram given in the datasheet of FS26 as somethings are not mentioned Detailly, is there any Documented or Video kind of thing where this is Explained detailly, if not Can someone Explain it in the Post.

Re: SBC FS26 state Flow

JozefKozon — Mon, 19 Aug 2024 10:04:52 GMT

Hi Naveen,

I have sent you an email.

With Best Regards,

Jozef

Re: SBC FS26 state Flow

Naveen158 — Mon, 19 Aug 2024 09:42:51 GMT

I am using FS26
Safety system basis chip with low power for ASIL D/ASIL B (ds616040-FS26) Datasheet, isn't it the same ?

Re: SBC FS26 state Flow

Naveen158 — Mon, 19 Aug 2024 10:19:04 GMT

Hi Jozef,

Yeah, Just gone through the Application Note, things are somewhat clear in this.

Thank you for the Document.

Re: SBC FS26 state Flow

MVR — Thu, 05 Sep 2024 19:18:23 GMT

Hello @JozefKozon

Can you please send me this file as well, please?

Re: SBC FS26 state Flow

Djuric — Tue, 05 Nov 2024 16:03:17 GMT

@JozefKozon Can you send me the same document?

My company has a valid NDA agreement with NXP.

Thank you.

Re: SBC FS26 state Flow

Djuric — Thu, 07 Nov 2024 18:31:08 GMT

@JozefKozon I would appreciate it if you could send me the same FS26 diagram you mentioned in the previous comment. The company I work for has a signed NDA agreement with NXP, which I also uploaded via the NXP website. Thank you.

Re: SBC FS26 state Flow

JozefKozon — Fri, 08 Nov 2024 05:59:30 GMT

Dear Djuric,

I apologize for a late reply. I have checked our NDA database and unfortunately I couldn't find your company listed there. If the NDA was signed only recently, it is possible that it wasn't entered into our system yet. Please create a new case here and we will support you via the case.

I apologize for inconvenience and thank you for your understanding.

With Best Regards,

Jozef

Re: SBC FS26 state Flow

Djuric — Fri, 08 Nov 2024 09:28:16 GMT

I opened a new ticket.
The only problem I can think of is that you entered the wrong name of the company I work for.
If you contact me by private message, I will send you the exact name of the company as well as the tag from the NDA contract.

This whole process is very slow and unnecessarily complex...

Re: SBC FS26 state Flow

JozefKozon — Fri, 08 Nov 2024 09:36:15 GMT

Hi Djuric,

thank you for creating the case. I see it already in our inbox. We will support you via the case. For your company name, yes I have entered incorrect name. I have read your company name from your email address, but this is not correct one. In the case you created I see your company name in the description and for this, yes there is a valid NDA in our database.

With Best Regards,

Jozef

Re: SBC FS26 state Flow

Djuric — Tue, 19 Nov 2024 18:34:55 GMT

@JozefKozon Could you do me a favor and send me an email with the requested FS26 diagram.
I would appreciate it very much.

Re: SBC FS26 state Flow

Djuric — Thu, 28 Nov 2024 19:25:11 GMT

@JozefKozon Please send me this file.
It has already been established that there is a valid NDA agreement.
Thank you.

Re: SBC FS26 state Flow

agouda — Sun, 16 Mar 2025 01:51:32 GMT

Hello @JozefKozon ,

I have the Eval-Board RDK358BMU, and facing some issue with FS26 w.r.t Standby mode and wakeup.

could you please send me the same document ?

would also appriciate if you send me an example, considering Eval-Board RDK358BMU.

B.T.W , my company has already a valid NDA.

thanks in advance

Abdullah