topic About MPC 5554 interfaces in Other NXP Products https://community.nxp.com/t5/Other-NXP-Products/about-MPC-5554-interfaces/m-p/214201#M2456 <HTML><HEAD></HEAD><BODY><P>Hi, i am interfacing EBI with external SRAM in 32 bit mode, actually i am writting to a location and then reading back. i am 20 bit correct data, but my last 12 bits are continuesly zero. from reference manual, i am using single master mode, with priority on MCU. For external SRAM i am using an address 2000_0000.&nbsp;</P><P>&nbsp;</P><P>Please i l be thankful if u help me out for last 12 bit data.</P></BODY></HTML> Thu, 07 Oct 2010 12:40:32 GMT ALI1033 2010-10-07T12:40:32Z about MPC 5554 interfaces https://community.nxp.com/t5/Other-NXP-Products/about-MPC-5554-interfaces/m-p/214199#M2454 <HTML><HEAD></HEAD><BODY><P>How to interface MPC 5554 with external SRAMs with parity for ECC,Interrupt controller,Link controller for ground mode testing, control logics like address decoder, byte write,burst access,wait state generator,bus controller required to ACCESS OTHER DEVICES...</P><P>&nbsp;</P><P>please suggest me in this regard</P><P>&nbsp;</P><P>&nbsp;</P><P>thank you</P></BODY></HTML> Wed, 21 Jul 2010 17:48:23 GMT https://community.nxp.com/t5/Other-NXP-Products/about-MPC-5554-interfaces/m-p/214199#M2454 pavan12345 2010-07-21T17:48:23Z Re: about MPC 5554 interfaces https://community.nxp.com/t5/Other-NXP-Products/about-MPC-5554-interfaces/m-p/214200#M2455 <HTML><HEAD></HEAD><BODY><P>&nbsp;</P><P>Hi</P><P>&nbsp;</P><P>I didn't get your question totally, but I guess you should look at the EBI, Xbar and also the eDMA as well.</P><P>Let me know if you need more information.</P><P>&nbsp;</P><P>Regards</P><P>Moe</P></BODY></HTML> Wed, 28 Jul 2010 02:42:38 GMT https://community.nxp.com/t5/Other-NXP-Products/about-MPC-5554-interfaces/m-p/214200#M2455 mfa1361 2010-07-28T02:42:38Z About MPC 5554 interfaces https://community.nxp.com/t5/Other-NXP-Products/about-MPC-5554-interfaces/m-p/214201#M2456 <HTML><HEAD></HEAD><BODY><P>Hi, i am interfacing EBI with external SRAM in 32 bit mode, actually i am writting to a location and then reading back. i am 20 bit correct data, but my last 12 bits are continuesly zero. from reference manual, i am using single master mode, with priority on MCU. For external SRAM i am using an address 2000_0000.&nbsp;</P><P>&nbsp;</P><P>Please i l be thankful if u help me out for last 12 bit data.</P></BODY></HTML> Thu, 07 Oct 2010 12:40:32 GMT https://community.nxp.com/t5/Other-NXP-Products/about-MPC-5554-interfaces/m-p/214201#M2456 ALI1033 2010-10-07T12:40:32Z