topic Re: MC IMX6Q6AVT10AD in Other NXP Products

MC IMX6Q6AVT10AD

zecabg — Fri, 16 Feb 2024 21:40:13 GMT

Hi NXP team ,

I have one automotive product with defect bga video processor NXP MC IMX6Q6AVT10AD, new unit cost to mach and i wish to repair my defect unit.

Old processor not temperature stabile and after some time work i louse picture on screen on my unit .

I order new MC IMX6Q6AVT10AD video procesor but me need information before change processor how to reprogram with same data from old processor ?

How and is it possible to read data from old processor and write it in new ?

How make and which connection me need to read and write data from NXP video processor MC IMX6Q6AVT10AD ?

Does NXP have some special programmer and softer which possible to bay which me help to solved my problem ?

Any information or suggestion will help .

Thanks in advance

Zeca

Manuel_Salas — Mon, 19 Feb 2024 19:15:15 GMT

Hello @zecabg ,

Remember that IMX6 is an MPU, so it boot from an external memory as eMMC or SD. You do not need change "information" from old processor to new one.

Maybe only the fuses, you can read the fuses from old processor and burn the same fuses in the new one.

I hope this information can helps to you.

Best regards.

Salas.

zecabg — Mon, 19 Feb 2024 20:01:06 GMT

Hi Alejandro ,

Ok - but how read and how program fuse on this processor ?

I have possibility to make UART connection on 115200 on unit i seen communication

but me need command how read fuses from old processor imx6 and command how program write fuses on new IMX6 processor ?

if possible please help .

Regards

Zeca

Manuel_Salas — Mon, 19 Feb 2024 23:47:56 GMT

You can refer here.

There is a post about how to read/write fuses from U-boot.

Best regards!

Salas.