Other NXP ProductsのトピックCustom bootloader jump to Application https://community.nxp.com/t5/Other-NXP-Products/Custom-bootloader-jump-to-Application/m-p/1810760#M21193 <P>I am using NXP iMXRT1020 , I tried programming the same LED code blinking for 1ms/2ms at 2 different address locations and branching from one code to another. This is working as it holds the same peripheral configuration. But it is not working if one address holds LED example code and another address is placed with UART example code. Please help me on this issue.</P> Mon, 19 Feb 2024 11:08:18 GMT wasimarfath 2024-02-19T11:08:18Z Custom bootloader jump to Application https://community.nxp.com/t5/Other-NXP-Products/Custom-bootloader-jump-to-Application/m-p/1810760#M21193 <P>I am using NXP iMXRT1020 , I tried programming the same LED code blinking for 1ms/2ms at 2 different address locations and branching from one code to another. This is working as it holds the same peripheral configuration. But it is not working if one address holds LED example code and another address is placed with UART example code. Please help me on this issue.</P> Mon, 19 Feb 2024 11:08:18 GMT https://community.nxp.com/t5/Other-NXP-Products/Custom-bootloader-jump-to-Application/m-p/1810760#M21193 wasimarfath 2024-02-19T11:08:18Z