Other NXP ProductsのトピックRe: How to install packages on i.mx 8 BSP Linux OS using apt-get ?

How to install packages on i.mx 8 BSP Linux OS using apt-get ?

bckpoojary — Fri, 16 Feb 2024 09:08:42 GMT

Hi,

I'm trying to install few packages on Linux 6.1.36 OS installed i.mx 8 nano board using apt-get install command, but for each packages I'm getting an error message like 'Unable to locate package <package name>. can you please help on this how to get resolve this issue. attachment I have uploaded below.

Thank you

Re: How to install packages on i.mx 8 BSP Linux OS using apt-get ?

JorgeCas — Fri, 16 Feb 2024 14:14:31 GMT

Hello, I hope you are doing well.

I suggest you take a look on next post.

Best regards.

Re: How to install packages on i.mx 8 BSP Linux OS using apt-get ?

bckpoojary — Mon, 19 Feb 2024 04:02:30 GMT

Hi @JorgeCas , thank you for your response.

Here i'm not using Yocto project or any other tool to create image, I just downloaded default BSP image zip file from NXP portal and flashed into emmc. can't we add packages into default BSP Linux OS ?

Best Regards

Re: How to install packages on i.mx 8 BSP Linux OS using apt-get ?

JorgeCas — Mon, 19 Feb 2024 13:56:18 GMT

Hello,

The i.MX BSP does not have a package manager like apt-get. You would need to add it to the Linux image. There is some information on the following documents, although further customization would be required.

https://community.nxp.com/docs/DOC-328199

https://community.nxp.com/message/834043?commentID=834043#comment-834043

Also, you could try to use NXP Linux Yocto Project BSP for Desktop PoC (it has package manager).

Best regards.