topic #S32R41 How to Debug I2c driver example in Other NXP Products

#S32R41 How to Debug I2c driver example

hongweibai — Mon, 19 Feb 2024 02:30:18 GMT

I get two S32R41 M7_0 I2c examples from RTD Example， it generates .bin and elf,but there is no QuadSPI reconfiguration data, How can i get a qspi file without QuadSPI reconfiguration data,Or is anyway to Debug I2c example without qspi file

Re: #S32R41 How to Debug I2c driver example

petervlna — Mon, 19 Feb 2024 08:08:48 GMT

Hello,

The question is a bit confusing, there is no relationship between the I2C debugging and QSPI reconfiguration data.

Could you please specify closer in details the issue?

Best regards,

Peter

Re: #S32R41 How to Debug I2c driver example

hongweibai — Mon, 19 Feb 2024 08:48:32 GMT

Hello，So how to debug I2C example on M7_0，
I’m using Lauterbach Trace32 to debug it，I need .qspi file to execute S32R41_QSPI_flash_wrapper.cmm, then executing S32R41_CM7_0_attch.cmm to debug M7_0，but when I’m generating qspi file，there are some error.
Is there anyway to debug I2C Example on M7_0 with .bin and .elf file?
Thank you

Re: #S32R41 How to Debug I2c driver example

petervlna — Thu, 22 Feb 2024 06:50:16 GMT

Hello,

I am still not sure if I understand you correctly.

But, yes, you can use precompiled binary files and load the to micro.

I dont know why you are not able to compile the code for QSPI.

You can use for example Trace scripts to load it directly:

Best regards,

Peter