topic 56F8323 PWM problem in Other NXP Products https://community.nxp.com/t5/Other-NXP-Products/56F8323-PWM-problem/m-p/135221#M200 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>I'm trying to run PWM0 (PWMA0_GPIOA0) in independent center-aligned mode under CW v8.0<BR />I added and configured PWM bean - compilation without any errors - but when I'm trying<BR />to enable output pads it's cause progam reset (doesn't matter if I enable this property<BR />in bean inspector or use OutputPadEnable() command). What could be wrong?</P></BODY></HTML> Fri, 03 Nov 2006 06:29:01 GMT kobi 2006-11-03T06:29:01Z 56F8323 PWM problem https://community.nxp.com/t5/Other-NXP-Products/56F8323-PWM-problem/m-p/135221#M200 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>I'm trying to run PWM0 (PWMA0_GPIOA0) in independent center-aligned mode under CW v8.0<BR />I added and configured PWM bean - compilation without any errors - but when I'm trying<BR />to enable output pads it's cause progam reset (doesn't matter if I enable this property<BR />in bean inspector or use OutputPadEnable() command). What could be wrong?</P></BODY></HTML> Fri, 03 Nov 2006 06:29:01 GMT https://community.nxp.com/t5/Other-NXP-Products/56F8323-PWM-problem/m-p/135221#M200 kobi 2006-11-03T06:29:01Z Re: 56F8323 PWM problem https://community.nxp.com/t5/Other-NXP-Products/56F8323-PWM-problem/m-p/135222#M201 <HTML><HEAD></HEAD><BODY>ok, problem solved - there was a little shortcircuit on PCB board between PWM and RESET tracks</BODY></HTML> Sat, 04 Nov 2006 02:41:38 GMT https://community.nxp.com/t5/Other-NXP-Products/56F8323-PWM-problem/m-p/135222#M201 kobi 2006-11-04T02:41:38Z