Other NXP ProductsのトピックRe: IMX31_PDK14_LINUX_BSP_R14 Demo images are not booting.

IMX31_PDK14_LINUX_BSP_R14 Demo images are not booting.

Ramesh_Danlaw — Mon, 03 Nov 2008 21:57:53 GMT

I have imx31 3 stack board. It came with the demo linux. It is working properly. Recently i downloaded the IMX31_PDK14_LINUX_BSP_R14 Demo images from the free scale . I am not able to boot this image. Where as i am able to boot with the old demo images?

Could any one helps me on this?

I am using PDK1.2.

Is there any issue with the hardware version ?

are these IMX31_PDK14_LINUX_BSP_R14 demo images can be run on PDK1.2?

Thank you,

S.Ramesh Chandra.

Re: IMX31_PDK14_LINUX_BSP_R14 Demo images are not booting.

fabio_estevam — Tue, 04 Nov 2008 00:27:39 GMT

Dear S.Ramesh,

Have you upgraded your Redboot version? You can't use the bootloader from SDK1.2 on SDK1.4. I suggest you that you do a full erase in your board (using ATK tool), then flash the bootloader that comes with SDK1.4 and try again.

Regards,

Fabio Estevam

Re: IMX31_PDK14_LINUX_BSP_R14 Demo images are not booting.

Ramesh_Danlaw — Tue, 04 Nov 2008 02:32:41 GMT

Hi Fabio Estevam,

Thanks for your response

I found two redboot images listed below with the demo images i downloaded? Which one i have to download?

1. mx31_3stack_redboot

2.mx31_3stack_redboot_mmc

Regds,

S.Ramesh Chandra.

Re: IMX31_PDK14_LINUX_BSP_R14 Demo images are not booting.

fabio_estevam — Tue, 04 Nov 2008 21:20:05 GMT

Please use number 1.

Regards,

Fabio Estevam