Other NXP ProductsのトピックHow to load uboot.bin in spi flash using codewarrior evaluation version in my T1042 custom board

How to load uboot.bin in spi flash using codewarrior evaluation version in my T1042 custom board

Bharath123 — Thu, 15 Jun 2023 10:10:15 GMT

Dear Sir,

We have a custom board which is having T1042 processor. I am using SPI flash for booting.

Initially i have connected the board to Codewarrior TAP with boot settings as 0x9E and i am able to debug in SRAM only. RCW override is performed. I would like to know how to download RCW in SPI flash. SPI flash what we have is not in the list of devices. Please help me for next step for how to load the SPI flash.

Thank You in advance,

Bharath

Re: How to load uboot.bin in spi flash using codewarrior evaluation version in my T1042 custom board

khushbur — Fri, 16 Jun 2023 09:54:37 GMT

Hi @Bharath123

SPI flash what we have is not in the list of devices.

You Need to add flash device MT28EW01GABA1HPC in codewarrior. Documentation on exactly how to do this exists in the CW install at:

..\CW PA v10.x\PA\PA_Tools\FlashToolKit\Documentation

I've attached it for your convenience.

Thanks

Khushbu

Please refer below link to flash your device

https://www.nxp.com/docs/en/application-note/AN4948.pdf