topic Re: Falcon Mode for IMX8MM V2 for linux in Other NXP Products

Falcon Mode for IMX8MM V2 for linux

shivam_awasthi — Wed, 22 Feb 2023 06:39:40 GMT

Hi there NXP team, I was working in this board 1st time and I have to implement FALCON mode to reduce the boot time of my board IMX8MM V2, I have tried the example related to imx6 but not succeeded it was not able to exicute spl export command for generation of FDT. so do you have any document related to this process for IMX8MM V2.? please help me with this I have stuck on it from a long time.

and also is there any procee to launch the camera in 2-3 seconds, if is there please let me know.

Re: Falcon Mode for IMX8MM V2 for linux

Dhruvit — Fri, 24 Feb 2023 13:08:19 GMT

Hi @shivam_awasthi

I hope you are doing well.

Please find below the document for the IMX8M family

https://www.nxp.com/docs/en/application-note/AN13709.pdf section 4 Bootloader optimizations.

is there any procee to launch the camera in 2-3 seconds, if is there please let me know.

=>To launch the camera at an early stage of the boot process, one can try the below suggestions.

Put the required kernel module first in the makefile.
Put the init function at a higher level i.e early_init

Thanks & Regards

Dhruvit Vasavada

Re: Falcon Mode for IMX8MM V2 for linux

shivam_awasthi — Mon, 27 Feb 2023 05:56:34 GMT

Hi @Dhruvit

Do you have any document related to this process..? if yes please share with me.

Re: Falcon Mode for IMX8MM V2 for linux

Dhruvit — Thu, 02 Mar 2023 11:01:35 GMT

Hi @shivam_awasthi,

I hope you are doing well.

Unfortunately, we have no such documents related to this.

Thanks & Regards,
Dhruvit Vasavada