topic 回复： Problem during debugging of sja1105, it hang during vTaskDelay() in Other NXP Products

Problem during debugging of sja1105, it hang during vTaskDelay()

Bongio98 — Wed, 23 Nov 2022 15:30:00 GMT

Hi,
this is the first time I'm posting here, so ready to improve if needed.

Currently I'm working with the sja1105 ethernet board and I'm trying to learn how to use it from the User software manual and through the "sja1105smbevm_tc10example" which I attached here.

I continue to experience a problem during debugging inside a vTaskDelay(), in particular:

here's the tasks priority

It hang after entering this vTaskDelay() inside can_task()

The console shows

Trying to debug more closely at that point I think the problem is around here:

Looking at wireshark view it also stops the capture at that point!!

Once I power recycle the board and unplug the debugger wireshark starts to capture again:

Pls help, thank you a lot

回复： Problem during debugging of sja1105, it hang during vTaskDelay()

kaden — Mon, 12 Dec 2022 11:39:44 GMT

Hi @Bongio98 ,

I understand your issue. Can you tell me to which position the rotary encoder on the SJA1105SMBEVM is set to?

Additionally, I'd like you to try to set it to position 4 and try again. Do you still see this issue?

Thank you.

Best regards

Kevin

回复： Problem during debugging of sja1105, it hang during vTaskDelay()

kaden — Mon, 02 Jan 2023 10:39:16 GMT

Hi @Bongio98

did you solve the issue or is it still there?

Best regards

Kevin