Other NXP Products中的主题 Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

Sample code to open, config and send sound file using MX27PDK PMIC audio device

Durian — Tue, 02 Jun 2009 23:21:11 GMT

Hi, can anyone post a simple sample app code to open and use the PMIC audio device so that I can emit some sound on the speakers? This is on the MX27PDK platform.

Thanks

Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

fabio_estevam — Thu, 04 Jun 2009 08:00:33 GMT

A quick way to get audio out is to run aplay on the MX27PDK:

aplay file.wav

You need to select alsa-utils and alsa-libs in LTIB (under Package list).

Regards,

Fabio Estevam

Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

Durian — Thu, 04 Jun 2009 11:00:11 GMT

Thanks for your reply.

I was hoping to just do something like open(/dev/snd/pcmc0d0p, O_RDWR) and then do ioctl and write on it to emit the sound. My app is really simple and I was hoping not to have to use aplay.

Does the PDK distro come with the source code for aplay so that maybe I can see how it in turn calls /dev/snd/pcmc0d0p?

Thanks again

Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

Durian — Mon, 08 Jun 2009 07:59:13 GMT

Fabio:

When you do aplay /dev/urandom, do you hear a sound on the MX27PDK?

Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

fabio_estevam — Thu, 11 Jun 2009 01:31:34 GMT

You can also try to inspect the mxc_ssi_test source available under the unit tests.

Regards,

Fabio Estevam

Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

fabio_estevam — Thu, 11 Jun 2009 01:34:50 GMT

No, you should use aplay as follows:

aplay file.wav

Why don't you just use aplay?

If you need aplay source code:

./ltib -p alsa-utils -m prep

then go to:

cd rpm/BUILD/alsa-utils-1.0.11rc2/aplay/aplay.c

Regards,

Fabio Estevam

Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

Durian — Sat, 13 Jun 2009 06:43:30 GMT

Fabio, so playing /dev/urandom will not emit any sound?

Do I need to set up any config file in /etc for aplay to work?

Do you know where I can get a small wav file that emits a short click sound? This is played whenever we press a button on the keypad on our target board.

Thanks

Re: Sample code to open, config and send sound file using MX27PDK PMIC audio device

Pats — Tue, 13 Oct 2009 23:17:38 GMT

I have been trying to get the mxc_ssi_tests going on my PDK and the compiler is unable to find a couple of header files pertaining to mc13783 . Missing files include mc13783_legacy/core/mc13783_external.h, mc13783_legacy/module/mc13783_audio.h, Of course the compilation fails, as references to declarations in this header file are missing. What I would like to know is how to solve this problem? I have selected all drivers pertaining to PMIC while compiling the kernel?