https://community.nxp.com/t5/Other-NXP-Products/Issue-while-connecting-to-Codewarrior-Tap/m-p/1497852#M14813 <P>Please refer to the attached resolution provided by CW development team.</P> Fri, 29 Jul 2022 07:58:35 GMT yipingwang 2022-07-29T07:58:35Z https://community.nxp.com/t5/Other-NXP-Products/Issue-while-connecting-to-Codewarrior-Tap/m-p/1497275#M14808 <P>Hi, i has been using <STRONG>Ubuntu 18.04</STRONG> and was able to properly connect to Codewarrior TAP, I used to run following commands in ccs console and fetch the Codewarrior details.</P><P>Recently i upgraded my Dev PC to <STRONG>Ubuntu 20.04</STRONG>, now when i run "config cc cwtap" followed by "show cc" in ccs console, i get the following error.</P><P><FONT color="#FF0000">"0:USB open Failure"</FONT></P><P><FONT color="#FF0000">"There are no command converters configured"</FONT></P><P><FONT color="#000000">Please let me know what has to be done.</FONT></P><P><FONT color="#000000">Thank you.</FONT></P><P>&nbsp;</P> Thu, 28 Jul 2022 10:58:16 GMT https://community.nxp.com/t5/Other-NXP-Products/Issue-while-connecting-to-Codewarrior-Tap/m-p/1497275#M14808 Ghouse 2022-07-28T10:58:16Z https://community.nxp.com/t5/Other-NXP-Products/Issue-while-connecting-to-Codewarrior-Tap/m-p/1497852#M14813 <P>Please refer to the attached resolution provided by CW development team.</P> Fri, 29 Jul 2022 07:58:35 GMT https://community.nxp.com/t5/Other-NXP-Products/Issue-while-connecting-to-Codewarrior-Tap/m-p/1497852#M14813 yipingwang 2022-07-29T07:58:35Z