Other NXP ProductsのトピックRe: NXP RADAR Toolbox License Error

NXP RADAR Toolbox License Error

robert10 — Wed, 20 Apr 2022 14:17:21 GMT

Hello,

I followed the quick start guide for the "NXP Radar Toolbox for S32R" and created a license according to my volume serial number. I copied it into the correct folder. But when I push the button "Verify RADAR Toolbox License", the message "No valid license file has been found".

Any ideas?

Re: NXP RADAR Toolbox License Error

petervlna — Fri, 22 Apr 2022 08:00:43 GMT

Hello,

I can see that license generation on our server was correct.

But radar toolbox for some reason is not verifying your correct license. Your license is for S32 SPT 2.x 1.5.0.

Do you have correct version installed?

There is a separate forum for Model based design toolbox, where they will be able to tell you more about your issue:

https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/bd-p/mbdt

Best regards,

Peter

Re: NXP RADAR Toolbox License Error

petervlna — Fri, 22 Apr 2022 08:00:48 GMT

Hello,

I can see that license generation on our server was correct.

But radar toolbox for some reason is not verifying your correct license. Your license is for S32 SPT 2.x 1.5.0.

Do you have correct version installed?

There is a separate forum for Model based design toolbox, where they will be able to tell you more about your issue:

https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/bd-p/mbdt

Best regards,

Peter

Re: NXP RADAR Toolbox License Error

robert10 — Fri, 22 Apr 2022 08:26:54 GMT

Thank you for this answer!

I have installed the version 1.5.1, since I've read that the license should work for all versions(?), and I use Matlab 2021a.

Best regards

Robert

Re: NXP RADAR Toolbox License Error

robert10 — Fri, 22 Apr 2022 08:31:10 GMT

Btw, if I execute "switch_spt", I get the error "Error code is -5, and error message is: No such feature exists."

Re: NXP RADAR Toolbox License Error

wennerbai — Wed, 01 Feb 2023 06:31:14 GMT

hello robert

I am faced the same question as you. How did you finally solve it? can you help me?

Re: NXP RADAR Toolbox License Error

Vamsi_Sirigina — Wed, 13 Sep 2023 23:27:23 GMT

any solution for above question , i have been facing same challenge in verifying license