Build custom Application in Flex-builder

Saitama — Tue, 15 Feb 2022 17:33:16 GMT

Thank you for your reply in previous post... Solved: Re: Debug in Layerscape LS1046A - NXP Community

I am using the LSDK 2004 in LS1046ARDB Board, I had an issue in downloading the packages from internet, but this issue is due to dpkg packages missing in my LS1046ARDB. I tried in another board with proper dpkg packages it worked. Now I am able to install the gdbserver package in LS1046ARDB.

Please let me know about the custom application creation and building in flex-build by using the following packages -> dpdk, openssl and pkcs11.
In LSDK user guide, they mentioned about custom application create using the Makefile. But I am a beginner to work with Makefile so let me give a example to build a network based application in LS1046ARDB.

Thanks in Advance.

Re: Build custom Application in Flex-builder

yipingwang — Fri, 18 Feb 2022 07:17:34 GMT

Please refer to the section "How to add new app component in Flexbuild" in LSDK 20.04 user manual.

You could run the following commands and refer to ovs_dpdk and pktgen_dpdk source code in packages/apps/networking/.

$ flex-builder -c ovs_dpdk -a arm64

$ flex-builder -c pktgen_dpdk -a arm64

Then refer to sections "ovs_dpdk" and "pktgen_dpdk" in packages/apps/networking/networking.mk to create the building procedure.

topic Re: Build custom Application in Flex-builder in Other NXP Products

Build custom Application in Flex-builder

Re: Build custom Application in Flex-builder