topic Re: MCUXpresso hangs after build program in Other NXP Products

MCUXpresso hangs after build program

scarletlee — Thu, 09 Dec 2021 02:01:06 GMT

Hi,

MCUXpresso version : 11.4.1_6260

My MCUXpresso always hangs when launching debug after build program.

As attach, my IDE show "no response" when launching debug.

scarletlee_0-1639015113465.png

Have any improve method? thanks.

By the way, no antivirus software running in background.

Re: MCUXpresso hangs after build program

kerryzhou — Thu, 09 Dec 2021 06:10:57 GMT

Hi @scarletlee ,

When you meet this issue, you can end the mcuxpresso ide in the task manager.

Then, delete the IDE workspace, then open the mcuxpresso IDE again, import your project again, it should run again.

Your IDE meets some issues which is blocking it, so you need to stop the IDE and reopen it again.

Please try it on your side.

If you still have questions about it please kindly let me know.

Best Regards,

Kerry

Re: MCUXpresso hangs after build program

scarletlee — Mon, 20 Dec 2021 00:49:31 GMT

Hi Kerry,

I still have this problem my method as below :

Re-install IDE
Delete old workspace and create new one
Import project
Run project and into debug mode ( IDE hangs about 1 min )
Stop debug mode, IDE change to develop mode ( IDE hangs about 40 sec

If you have any solutions, please tell me.

Thanks.

Re: MCUXpresso hangs after build program

kerryzhou — Mon, 20 Dec 2021 02:50:31 GMT

Hi @scarletlee

I checked the MCUXpresso IDE install requirement:

Host operating systems:
- Ubuntu Linux^® 18.04 LTS / 20.04 LTS
- macOS 10.14/Mojave, 10.15/Catalina, 11.x/Big Sur
- Microsoft^® Windows^® 10 (64-Bit only)

Do you meet the PC requirement?

BTW, what's the debugger you are using?

I think you can try the NXP official EVK board to test it, the RT board contains the on board CMSIS DAP debugger.

Best Regards,

Kerry

Re: MCUXpresso hangs after build program

scarletlee — Mon, 20 Dec 2021 04:10:44 GMT

Hi @kerryzhou

My OS is Win10 (64-bit). And I tested LPC-Link2 and JTAG they are always have this problem.

I will follow your suggestion, try official EVK with on board debugger.

Thanks.

Re: MCUXpresso hangs after build program

kerryzhou — Mon, 20 Dec 2021 04:40:04 GMT

Hi @scarletlee

When you build the project, whether it pass or not? Or just debug issues now?

Please also share some hangs screen.

Best Regards,

Kerry

Re: MCUXpresso hangs after build program

scarletlee — Mon, 20 Dec 2021 04:52:51 GMT

Hi @kerryzhou

Compile always pass, I will upload a video to show my problem.

Thanks.

Re: MCUXpresso hangs after build program

kerryzhou — Mon, 20 Dec 2021 04:58:43 GMT

Hi @scarletlee

What's the NXP product you are using? I mean the chip?

Eg, kinetis or RT chip, or others?

I think it is also related to your board if your build works, just the debugger have issues. When you connect the external LPC-LINK2, you also need to disconnect the on board debugger, or you need to make sure your chip board works OK at first.

Best Regards,

Kerry

Re: MCUXpresso hangs after build program

scarletlee — Wed, 29 Dec 2021 09:41:17 GMT

Hi @kerryzhou

I uploaded video, more detail please check the attachment.

And I tested these devices :

1. i.MX RT106F EVK with LPC-LINK2 => Hangs

2. i.MX RT106F EVK with LPC-Link Pro => Hangs

3. i.MX RT106F EVK with JTAG => Hangs

4. i.MX RT1060 EVK => It's work!

I guess maybe JLINK has some problem, because i.MX RT1060 is debug on CMSIS.

So...Could you tell me how to modify debug setting to CMSIS on i.MX RT106F?

Re: MCUXpresso hangs after build program

kerryzhou — Wed, 29 Dec 2021 09:56:44 GMT

Hi @scarletlee

Thanks for your effort!

1. RT106F EVK

Please tell me which detail RT106F board you are using?

2. JLINK driver version

Please tell me your JLINK driver version, it also related to the JLINK driver, from your test result, after compare, the JLINK downloading is disappeared.

After you tell me the details, I will check it on my side.

Best Regards,

Kerry

Re: MCUXpresso hangs after build program

scarletlee — Thu, 30 Dec 2021 07:13:50 GMT

HI @kerryzhou

My reply as below :

1. RT106F EVK

Please tell me which detail RT106F board you are using?

SLN-VIZN-IOT (Two camera)

2. JLINK driver version

Please tell me your JLINK driver version

V7.54C

Re: MCUXpresso hangs after build program

kerryzhou — Fri, 31 Dec 2021 07:11:30 GMT

Hi @scarletlee ,

Thanks for your information.

Today, I also test it on my SLN-VIZN-IOT board with the SDK code:

SDK_2.8.1_SLN-VIZNAS-IOT\boards\sln_viznas_iot\sln_boot_apps

SDK_2.8.1_SLN-VIZNAS-IOT\boards\sln_viznas_iot\sln_vision_apps\elock_oobe

My MCUXpresso IDE version is totally the same as you.

My Segger Driver version is: V7.50.

This is my test result:

kerryzhou_0-1640934339385.png

kerryzhou_1-1640934368855.png

Please also download the bootloader and bootstrap, and disable the verification:

kerryzhou_2-1640934409742.pngkerryzhou_3-1640934419909.pngkerryzhou_4-1640934427718.png

You can see, I can enter the debug mode.

BTW, do you have the segger JLINK? I am using the Segger JLINK plus.

You also can try my Jlink driver version.

Best Regards,

Kerry

Re: MCUXpresso hangs after build program

scarletlee — Wed, 12 Jan 2022 01:01:52 GMT

@kerryzhou

Hi Kerry,

Thanks for your reply, I re-install anything ( include Windows10 ) and than it's no problem.

No happened this situation again !

I think this case can close.