Ucode8 EPC Session Timing

justin_andrews2 — Mon, 20 Dec 2021 21:56:56 GMT

I'm trying to determine what the session times are for the Ucode8.

Per the EPC standard, the Session flag S1 should be between 500ms and 5000ms, and the Session flag S2/S3 and SL should be greater than 2s.

Is there a spec or characterization of these EPC session timings for the Ucode8?

Re: Ucode8 EPC Session Timing

Kan_Li — Wed, 22 Dec 2021 05:14:18 GMT

Hi @justin_andrews2 ,

UCODE 8 comply with the following spec:

Please kindly refer to https://www.gs1.org/sites/default/files/docs/epc/Gen2_Protocol_Standard.pdf for more details.

Hope that makes sense,

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Re: Ucode8 EPC Session Timing in Other NXP Products

Ucode8 EPC Session Timing

Re: Ucode8 EPC Session Timing