Other NXP ProductsのトピックRe: PN7462 Debugging issue

PN7462 Debugging issue

kralsemo06 — Wed, 08 Dec 2021 08:52:37 GMT

Hi,

I designed a hardware using a PN7462. But I can't upload firmware. I am using the LPC-Link2 debugger.

I'm sure the connections between the PN7462 and the debugger are correct.

I am attaching a photo of the schematic. Waiting for your quick return.

Best regards,

Re: PN7462 Debugging issue

fangfang — Thu, 09 Dec 2021 02:26:53 GMT

Hello,

We recommend you refer to the design files of the development board for PN7462 as the link.

URL:https://www.nxp.com/products/rfid-nfc/nfc-hf/nfc-readers/nfc-controller-development-kit:OM27462CDKP.

For the customer board you may firstly test it via NFC cockpit as the link

https://www.nxp.com/products/rfid-nfc/nfc-hf/nfc-readers/nfc-cockpit-configuration-tool-for-nfc-ics:NFC-COCKPIT.

Have a nice day.

https://www.nxp.com/products/rfid-nfc/nfc-hf/nfc-readers/nfc-cockpit-configuration-tool-for-nfc-ics:NFC-COCKPIT

Re: PN7462 Debugging issue

kralsemo06 — Fri, 10 Dec 2021 09:05:19 GMT

Hi,

I referenced this document when designing hardware(UM10858). I am using LDO(+3V3) as an external power supply. Can u explain in detail why I can't assign a program by checking the schematic.

Can u tell me the possibities why ı can't assign a program.

Waiting for your early and fast reply

Best regards,

Oguzhan,

Re: PN7462 Debugging issue

fangfang — Mon, 13 Dec 2021 02:16:37 GMT

Hello,

Thanks for your update information.

We can't confirm about the question just the information.

as the last email .For the customer board you may firstly test it via NFC cockpit as the link.

URL:https://www.nxp.com/products/rfid-nfc/nfc-hf/nfc-readers/nfc-cockpit-configuration-tool-for-nfc-ics:NFC-COCKPIT.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------